Epson Stylus C63 to Epson Stylus C65 Counter adjustment

Troubleshoot the Printer problem "parts inside printer near end service life” or “parts inside printer end of service life”, but before follow the procedure, make sure that the power of the printer is on, usb cord properly connected to your computer and most of all there’s no pending print task in your printer.
Follow the steps below:

• Open AdjProg.exe
• Click Accept
• Click Select button, and click your printer model
• Click "OK"
• Click the Particular Adjustment Mode
• Select Waste ink pad counter
• Click OK
• Click Initialization (this will reset counter)
• Turn off the printer
• Then turn on again.

  download the program for epson
another for epson t13 at here http://goreset.blogspot.com/2010/12/download-software-resetter-epson-t13.html

Read more

HOW TO RESET CHIP ON EPSON 69 PRINTER CARTRIDGE

How to Reset the Chip on an Epson 69 Printer Cartridge,
Epson 69 black ink cartridges are used in a wide range of inkjet printers Epson. Every 69 Epson cartridge contains a chip that controls the amount of ink used. If a cartridge is refilled after the ink runs low, the chip must be restarted for the Epson printer to identify the cartridge as full. Epson chip resetter is required to redress the chip.

Instructions
things you need:
Epson chip resetter 

1 Put the Epson 69 cartridge so that the gold contacts on the bottom of the cartridge facing the metal pins on the chip resetter.
2 Press the Epson 69 cartridge in the resetter so that the contacts are touching the gold leads. Hold the cartridge in place.
3 Release the Epson cartridge chip resetter after the green LED comes resetter steadily. The chip is reset.

Read more

How to Reset Epson Stylus SX105 Printer

Before opening the Epson adjusment program, make sure there it is power on, properly connected to your computer and most of all there’s  no pending print task in your printer.
Follow the steps below:

Open the Adjprog.exe. Click “Accept” button to open the program

 
This is the adjustment program of Epson Stylus SX105 Printer

Select Model Name, Destination, Port
Then Click “Particular adjustment mode” button.

Select on “Waste ink pad counter” and click “OK” button

Check on Main pad counter and click on “Initialization” button and the program will reset the protection counter.

• Turn off the printer as a program instructed then turn on again
• Finish

Click to download the utility program

Read more

How to Reset Counter Epson Stylus RX680 Printer

Before opening the Epson adjustment program, make sure that the power of the printer is on, properly connected to your computer and most of all there’s no pending print task in your printer.

The Epson Stylus RX680  Printer Model

Follow the steps below:

• Open AdjProg.exe
• Click Accept
• Click Select button, and click your printer model
• Click "OK"
• Click the Particular Adjustment Mode
• Select Waste ink pad counter
• Click OK
• Click Initialization (this will reset counter)
• Turn off the printer
• Then turn on again.

Finish

Click here to download the reset program

Read more

How to print a configuration page on an HP LaserJet P3005 printer

To print a config page from a LaserJet P3005:

- Press the green Select button to bring up the menu.  (If the printer is idle, press the Select button twice, once to wake it up and once to bring up the menu.)
- Press the down arrow button twice until INFORMATION is displayed.
- Press the Select button.
- Press the down arrow button once until PRINT CONFIGURATION is displayed.
- Press the Select button.

Read more

How to print a usage page from an HP LaserJet P4010 P4014 P4015 P4510 P4515 printer

To print a usage page from a LaserJet P4015 series printer:

- Press the down arrow button to enter the main menu.  (If the printer is sleeping, you may have to press the down arrow button once to wake it up, and then again to enter the menu.)
- Press the down arrow button again until Information is the highlighted choice.
- Press the OK button to select it.
- Press the down arrow button until Print Usage Page is the highlighted option.
- Press OK to select it.  The usage page will print out shortly.

Read more

How to print a configuration page from an HP LaserJet P2015 printer

Unlike many HP printers, the LaserJet P2015 does not have a built-in menu or a display Lcd.  You cant scroll through the menu options to find different settings or see how much toner is left in the cartridge.  The only way to view information at the printer is to print out a configuration page.

The configuration page will show you the printers page count, the paper tray settings, the printers serial number, how much memory is available, and much more.  In addition to the configuration page (called the Self Test/Configuration Page) a Supplies Status Page and Network Configuration Page (if applicable) will also print out when you print the configuration page.

To print the configuration page for a LaserJet P2015 printer, follow the steps below.

Turn the printer on using the on/off switch located toward the back of the right side of the machine.  The lights will blink and the printer will go through its warm-up sequence.

Once the printer has warmed up and done all of its self checks, the green light should stay constant and the other lights should go off.  If any of the orange lights remain on or start flashing, you likely either have a paper jam, have no paper loaded in the printer, or are low on toner.  (You will need to remedy any of these situations before the configuration page can be printed.)  If the lights show a paper jam, remove the paper tray and the toner cartridge and check for any stray paper.

Press the Go button (the green button on top of the printer) and hold it down for approximately four seconds. After about four seconds,  the other lights on top of the printer will start to flash.  At this point, release the Go button.  The configuration page will start to print out.

Read more

How to print a configuration page from an HP LaserJet 6P

The HP LaserJet 6P is an older laser printer that doesnt feature the display Lcd and array of buttons that the newer LaserJet printers have.  Therefore, you cant do as much from the printer itself as you can on a newer LaserJet, but one thing that you still can do is print out a configuration page.

- Press the power button on the right side of the printer (about halfway back) to power the printer up, unless its already on.  It will warm up and come to ready, and the third LED on top of the printer (the one closest to the front of the printer) should light up green.

- There are two buttons on the top of the printer, one on either side of the three LEDs.  The farthest one is a round button with a triangle on it, and the other is a long skinny button with a vertical line inside a diamond.  Press and hold both buttons down at the same time.

- Hold both buttons down for about five or six seconds, then release them.  The middle LED will light up green and the third LED (that was solid green before) should begin flashing.  After a couple of seconds, the configuration page will print out.

Read more

How to print a configuration page on an HP LaserJet M1319f MFP

The configuration page on an HP printer gives you a lot of information.  The exact contents of the page vary from printer to printer, but some of the things you can generally find on a configuration page include the printers page count, serial number, current network setup, paper tray settings, and available memory.  To print a configuration page from a LaserJet M1319f MFP, follow the steps below.

- Press the Setup button on the printers operation panel (just below the display Lcd).
- Scroll through the menu options until you see Reports.
- Press the OK button.
- Scroll through the report options until you come to Config Report.
- Press OK to print out the configuration page.

Read more