How to print a configuration page from an HP LaserJet 6P

The HP LaserJet 6P is an older laser printer that doesnt feature the display Lcd and array of buttons that the newer LaserJet printers have.  Therefore, you cant do as much from the printer itself as you can on a newer LaserJet, but one thing that you still can do is print out a configuration page.

- Press the power button on the right side of the printer (about halfway back) to power the printer up, unless its already on.  It will warm up and come to ready, and the third LED on top of the printer (the one closest to the front of the printer) should light up green.

- There are two buttons on the top of the printer, one on either side of the three LEDs.  The farthest one is a round button with a triangle on it, and the other is a long skinny button with a vertical line inside a diamond.  Press and hold both buttons down at the same time.

- Hold both buttons down for about five or six seconds, then release them.  The middle LED will light up green and the third LED (that was solid green before) should begin flashing.  After a couple of seconds, the configuration page will print out.