The waste ink Pads in Epson L110 printer

Hello friends, in my previous post, i have given you information about the ink resetting in Epson L110 printer.

Now yesterday, i have found out the location of the Waste ink Pad in Epson L110.

Just turn the Epson L 110 Printer around to the back, pull the paper in tray up, just next to the power plug socket, you would find a screw. Just use a star screw driver, to unscrew the screw.

This is the only lock to the Wast ink Pad set up. Now lock the check valve to the ciss tank, so that there is no out flow of ink, when you turn the printer upside down.

Remove the ciss tank from the main Printer frame.

Now turn the printer upside down 50%, not a 100 % upside down.

Now move the paper output tray from the bottom a little to the front. On the left side of the bottom of the Epson L 110 printer, the Waste Ink Pad is located, a big rectangular box, with Waste ink pads stuffed in it.

Now move the Waste Ink Pad compartment a little to the right, the chamber would unlock itself and pull the chamber out.

If you want to reuse the Waste Ink Pad, you could saturate the Waste Ink Pads in alcohol, then dry them and again use it in the printer.

But all i would suggest to use is a Waste Ink Tank bottle to be mounted new. This time in this printer, Epson technical department has thought very meticulously and done a new trick to stop refilling by bulk inks.

Commercially, there is no Waste Ink Tank Bottle or kit available in the market. But you can make one by yourself. I have already done a Waste Ink Tank myself. It is being tested for some time.