Showing posts with label CHIP. Show all posts
Showing posts with label CHIP. Show all posts

Sunday, November 2, 2014

HOW TO RESET CHIP ON EPSON 69 PRINTER CARTRIDGE

How to Reset the Chip on an Epson 69 Printer Cartridge,
Epson 69 black ink cartridges are used in a wide range of inkjet printers Epson. Every 69 Epson cartridge contains a chip that controls the amount of ink used. If a cartridge is refilled after the ink runs low, the chip must be restarted for the Epson printer to identify the cartridge as full. Epson chip resetter is required to redress the chip.

Instructions
things you need:
Epson chip resetter 

1 Put the Epson 69 cartridge so that the gold contacts on the bottom of the cartridge facing the metal pins on the chip resetter.
2 Press the Epson 69 cartridge in the resetter so that the contacts are touching the gold leads. Hold the cartridge in place.
3 Release the Epson cartridge chip resetter after the green LED comes resetter steadily. The chip is reset.
Read more

Saturday, November 1, 2014

HOW RESET EPSON T5570 CARTRIDGE CHIP

How to Reset a T5570 Cartridge Chip ? Refilling printer cartridges can help reduce the cost of printer maintenance. Epson cartridges use "smart chips" that detect the level of ink cartridge. When the cartridge begins to run out of ink, it gives a message to the printer. Thats how he learns that the cartridge must be recharged or replaced. Even if the cartridge is reloaded due, the chip still give low ink messages unless you reset the chip.

Instructions
Tools: Towels, Chip resetter for Epson T5570 

1 Buy a smart chip resetter for Epson T5570. You can buy online or buy an office supply store.
2 Clean the cartridge with a towel. Be careful when cleaning the nodes in the back of the cartridge, because this is where you set the resetter.
3 Hold the resetter to the back of the cartridge. Bottom of the resetter has a button on it. This part should come in the top, while the saturation.
4 Press the resetter and hold for about 8 seconds. This will restore the factory settings of the cartridge. You know that the cartridge has been revived by a small LED light on the resetter will start blink.
5 Release the clip at the bottom of the resetter to remove the cartridge.
6 Insert the cartridge into the printer. The printer will recognize the refilled ink level.
Read more