Epson Adjustment Program for Stylus Photo R270

Protection counter is full. The error message appears  "parts inside printer near end service life” or the message “parts inside printer end of service life”, but before following the procedure, make sure that the  printer is on, usb cord properly connected to your computer and  most of all there’s no pending print task in your printer.

Follow the steps below:

• Open AdjProg.exe
• Click Accept
• Click Select button, and click your printer model
• Click "OK"
• Click the Particular Adjustment Mode
• Select Waste ink pad counter
• Click OK
• Click Initialization (this will reset counter)
• Turn off the printer
• Then turn on again.

Done
Click here to Download the resetter

Read more

Manual reset for Canon i320

i320 waste ink counter reset :
1. Turn off the printer and unplug the cable power.
2. Press and hold the POWER button, plug cable power the printer.
3. The indicator should be green.
3. Press and release the RESUME button , the indicator should be orange.
4. Press and release the RESUME button again, the indicator should be green.
5. Release both buttons.
6.Connect the printer to PC.7.Open General Tool software,choose "USB PORT".
8.Choose "SET DESTINATION 1", OK

Read more

Manual reset for Canon IP2000

I found this fix by Tman on another thread and it has worked for my IP2000
Canon S9000, S300, S400, i550, i560, i850, i860, i865, i9100, i9950, PIXMA iP3000 above,
1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.
8. Your printer should respond as normal.

Read more

HP 1180c Printer Driver For Windows 7 64 bit Download

HP 1180c Printer Driver For Windows 7 64 bit Download 

HP 1180c Printer Driver For Windows 7 64 bit Download This is a device driver that you can use its content because this driver is very powerful and special for your driver sila you click on the download link below 

Supports Operating System for HP 1320 Printer Driver For Windows 7 64 bit Download :

•         Mac OS X v10.8,
•         Mac OS X v10.7)
•         Mac OS (OS X v10.9,
•         Linux
•         Windows 8 and 8.1 (32bit, 64bit)
•         Windows 7 (32bit, 64bit)
•         Windows Vista (32bit, 64bit)
•         Windows XP (32bit, 64bit)
•         And Other Operating Systems

How to Install HP 1320 Printer Driver For Windows 7 64 bit Download :

To install Follow the steps that have been provided below: HP 1320 Printer Driver For Windows 7 64 bit Download  :

• Have you downloaded the driver file by clicking the download link that we have prepared the following then save the file that has been downloaded to the folder you specified.
• Then you open the file that you downloaded from our website by clicking twice (EXE file), it will automatically start intalasi.

How to Uninstall HP 1320 Printer Driver For Windows 7 64 bit Download :

You can use the Control Panel to uninstall the driver program:

• Select Control Panel On the Start menu, and then click Uninstall under this program and displays a page with a list of programs that you installed.
• In the program you want to uninstall Double-click the.  
• Then click "Yes" and "OK" when you are asked, and the uninstall process to be completed.

Note: The steps that we have provided is of a general nature and is only for the Windows Operating System.And we provide this procedure may be slightly different from the other OS.

Read more

Manual reset for Canon BJC 3000

BJC-3000 :
Here is the reset process. You need to carefully follow the steps for it to work. Not to defend Canon but without the waste ink counter you will at some point end up with ink leaking from the printer.
Waste Error Reset :
Step 1: Start with POWER OFF. Hold down the RESUME button. Press and hold the POWER button. The indicator should light GREEN unblinking.
Step 2: Without releasing the POWER button, release RESUME, then double-click (press and release twice) RESUME. Finally release POWER. Each click of RESUME should cause the indicator to change (first to ORANGE, then back to GREEN). If the reset is going to work, upon release of the POWER button, the GREEN will blink while the printer goes through its irritating noisy start-up routine of making all the moving parts whirr and grumble (though not, I insist, beep!) and then settle down to unblinking green (I have never achieved this happy status).
Step 3: Press the resume button either three times (according to Wes) or six times (according to Marks Pidgin it would take 3 double-clicks to get 3 orange lights - hey, Im just a mathematician trying to make sense of it all!)
Step 4: Press POWER OFF to set data. Apparently this both stores the reset and powers off the printer. When you power on again all should be well!
there were no beeps and 3 resumes worked in step3

Read more

Manual reset for Canon i550 i560 i850 i950 i960 May work with i860 i865

This manual for all canon I series from I560 above and Pixma series from IP3000 series seems use the same reset procedures like canon s9000
the same procedures works for i560/s400/i9100/i9950/s300/i850/ and Pixima From Ip3000 above

Canon i550, i560, i850, i950, i960 (May work with i860, i865)
1. Start with the printer OFF
2. Hold down RESUME and then hold down POWER
3. release RESUME
4. press RESUME twice, then release POWER
5. Let green light blink until printer is done moving print head.
6. Select functions below with RESUME press POWER to execute:

Number of presses - light color - function :
0 presses - green - Test print (or exit service mode on i960)
1 press - orange - EEPROM info print (plus grid nozzle diagnostic on i960)
2 presses - green - EEPROM initialize
3 presses - orange - Reset waste ink counter

Read more

Here is the reset for the Canon Canon BJC 2000 BJC 2100 Series

Waste Error Reset :
ERROR : Used ink tank is full
1. Remove the Cartridge
2. Unplug the AC Power Cord
3. Close Front access panel
3. Hold down the RESUME/RESET button and plug in the AC power cord
4. Release RESUME/RESET after plugging in the AC Power cord.
5. Press the RESUME/RESET once within 5 seconds and release the RESUME/RESET .
6. Press and HOLD RESUME/RESET for two seconds or more and release it.
7. Press and HOLD RESUME/RESET for two seconds or more and release it.
8. Unplug AC Power Cord to set data
If you need nore info try here :
- http://www.neilslade.com/papers/inkjetstuff.html
Wem, Try soaking the print head in a shallow dish/plate of hot distilled water to remove any dried out ink. You may need to repeat the process a few times to fully unclog the print head.

Read more

Manual reset for Canon BJ F900 F890 F700 F500 S900 S820 S750 and S520

The waste-ink counter for the BJ F900, F890, F700, F500, S900, S820, S750 and S520 are all reset in the same manner :
1. Turn off the printer.
2. Press and hold the RESUME button, then press and hold the POWER button.
3. Release the RESUME button, then press and release the RESUME button two more times in succession. (youre still holding the POWER button during this). The printer mechanics will move momentarily.
4. You are now in Service mode.
5. Pressing the RESUME key will select a function; for example, pressing RESUME 4 times will select the clear waste ink counter function. The lamp will alternate color with each key press.
1 : Service/factory test printout, including ink sensor check
2 : EEPROM info printout
3 : EEPROM initialization
4 : Clear the waste-ink counter
5 : Printer model setting. (more selections beyond this- leave this alone)
After selecting mode, press the POWER button to commit the change, and return to the top of the function selection menu. Pressing the POWER button again turns off the printer for a restart.
If you have a defective printer head, your power lamp may flash during the service mode key-in, and info printouts may not work. In this case, clearing the waste-ink counter may not fix your problem.

Read more

Manual reset for Canon BJC 1000

You might try www.2manuals.com for the service manual but here is the reset code for the Canon BJC 1000 :

1: Remove Cartridge
2: Unplug the AC Power Cord
3: Hold down the RESUME button
4: Release RESUME after plugging in the AC Power cord.
5: Press the RESUME once within 5 seconds and release the RESUME .
6: Press and HOLD RESUME for two seconds or more and release it.
7: Press and HOLD RESUME for two seconds or more and release it.
8: Unplug AC Power Cord to set data.
I hope this info helps you...

Read more

HP 1320 Printer Driver For Windows 7 64 bit Download

HP 1320 Printer Driver For Windows 7 64 bit Download 

HP 1320 Printer Driver For Windows 7 64 bit Download This is a device driver that you can use for your business please download link below because these drivers sanggat good and reliable.

 Supports Operating System for HP 1320 Printer Driver For Windows 7 64 bit Download :

•         Mac OS X v10.8,
•         Mac OS X v10.7)
•         Mac OS (OS X v10.9,
•         Linux
•         Windows 8 and 8.1 (32bit, 64bit)
•         Windows 7 (32bit, 64bit)
•         Windows Vista (32bit, 64bit)
•         Windows XP (32bit, 64bit)
•         And Other Operating Systems

How to Install HP 1320 Printer Driver For Windows 7 64 bit Download :

To install Follow the steps that have been provided below: HP 1320 Printer Driver For Windows 7 64 bit Download  :

• Have you downloaded the driver file by clicking the download link that we have prepared the following then save the file that has been downloaded to the folder you specified.
• Then you open the file that you downloaded from our website by clicking twice (EXE file), it will automatically start intalasi.

How to Uninstall HP 1320 Printer Driver For Windows 7 64 bit Download :

You can use the Control Panel to uninstall the driver program:

• Select Control Panel On the Start menu, and then click Uninstall under this program and displays a page with a list of programs that you installed.
• In the program you want to uninstall Double-click the.  
• Then click "Yes" and "OK" when you are asked, and the uninstall process to be completed.
  

Read more