Usually in Epson Printers, there is a hidden Waste Ink Tank somewhere in the Printers bottom. There is also a set of Waste Ink Pads to absorb Waste Ink. When the Ink Pads gets Saturated with Ink and can no longer take more ink.
The printers Software prompts the computer, to replace the Waste Ink Pads or call for the customer care technicians.
Now this time around in Epson L 110 printer, there is no Waste Ink Tank, only a very big compartment full of Waste Ink Pads.
Once the Waste Ink Pads are full, the printer would turn red lights on, give you many prompts to check the ink level and so on.
I have successfully located the Waste Ink Pads and also arrived at a possible solution for the Waste Ink without the use of the waste Ink Pads.
I just reverted to the idea of fixing a detachable Waste Ink Tank to the Waste Ink Output point.
But the Epson Engineers did some quick thinking and made the Waste Ink Output tube very small in length, so that it cannot be pulled out to rejoin to another tube to make a Waste Ink Tank Possible.
Caution, Warning, Please Do Not Pull Out the Waste Ink Output Tube, once it is visible to you. I have tried it many times, but it cannot be done with a forcep or any other instrument.
Hence stop thinking of doing this. Now you have no other option left to attach the External Waste Ink Tank.
But I have got an idea and i have tried and tested it also. It is working. But for this you will have to do some indegenious re - tooling work to make it a success.
Just try to avoid the usual tendency of fitting a new tube to the Waste Ink Rubber Tubing. Instead the fix a bigger tubing to the Hard black plastic Waste Ink Opening, just shown above in green colour arrow.
You have to use your own plastic container, which fixes correctly to the Hard black plastic Waste Ink Opening.
Just use a used Mosquito Repellent bottle. Just like the below shown image. You can improvise. Just you have do some retooling, or widening or narrowing of the plastic bottle.
Just remove the cap, inside you will be having black rod, which diffuses the mosquito repellent fluid. Pull out the black rod. Now try to fit the bottle to the Hard black plastic Waste Ink Opening (not the white tubing).
Personally, i have attached a squeezable plastic gum bottle.
This is a just a gum bottle. They fill synthetic gum in these bottles and sell for five rupees. i got a used bottle and then removed the top cover and the nozzle. Take the clear white bottle.
This plastic bottle is very sensitive to heat, just heat a small screw driver and put a hole at the bottom centre of the white plastic bottle
Let the plastic cool for some time. Take a straight plastic connector used for a fish tanks. Insert the Straight plastic connector in to the recently created hole a the bottom of the white plastic bottle. Just put some quick fixing hard adhesive to the plastic connector and then connect it. So that there is no leak.
Let it dry for a few minutes. Check for any leakage and then proceed to next step. Now just connect a white plastic fish tank aquarium tube to the outside of the straight plastic connector.
Connect the Plastic bottle to the Hard black plastic Waste Ink Opening in Epson L 110 Printer and then let the tubing come down and put the tube in to a bigger plastic container externally.
First i use a buffer tank, the buffer tank is attached to the printer, there is a hosing tube from the buffer tank to the bigger external tank.
The ink could be drained periodically from bigger external tank. Whereas the buffer tank is always attached to the L 110 printer.
There is no need to re attach the Waste Ink Pad Chamber, by using this method.
The printers Software prompts the computer, to replace the Waste Ink Pads or call for the customer care technicians.
Now this time around in Epson L 110 printer, there is no Waste Ink Tank, only a very big compartment full of Waste Ink Pads.
Once the Waste Ink Pads are full, the printer would turn red lights on, give you many prompts to check the ink level and so on.
I have successfully located the Waste Ink Pads and also arrived at a possible solution for the Waste Ink without the use of the waste Ink Pads.
I just reverted to the idea of fixing a detachable Waste Ink Tank to the Waste Ink Output point.
But the Epson Engineers did some quick thinking and made the Waste Ink Output tube very small in length, so that it cannot be pulled out to rejoin to another tube to make a Waste Ink Tank Possible.
Caution, Warning, Please Do Not Pull Out the Waste Ink Output Tube, once it is visible to you. I have tried it many times, but it cannot be done with a forcep or any other instrument.
Hence stop thinking of doing this. Now you have no other option left to attach the External Waste Ink Tank.
But I have got an idea and i have tried and tested it also. It is working. But for this you will have to do some indegenious re - tooling work to make it a success.
Just try to avoid the usual tendency of fitting a new tube to the Waste Ink Rubber Tubing. Instead the fix a bigger tubing to the Hard black plastic Waste Ink Opening, just shown above in green colour arrow.
You have to use your own plastic container, which fixes correctly to the Hard black plastic Waste Ink Opening.
Just use a used Mosquito Repellent bottle. Just like the below shown image. You can improvise. Just you have do some retooling, or widening or narrowing of the plastic bottle.
Just remove the cap, inside you will be having black rod, which diffuses the mosquito repellent fluid. Pull out the black rod. Now try to fit the bottle to the Hard black plastic Waste Ink Opening (not the white tubing).
Personally, i have attached a squeezable plastic gum bottle.
This is a just a gum bottle. They fill synthetic gum in these bottles and sell for five rupees. i got a used bottle and then removed the top cover and the nozzle. Take the clear white bottle.
This plastic bottle is very sensitive to heat, just heat a small screw driver and put a hole at the bottom centre of the white plastic bottle
Let the plastic cool for some time. Take a straight plastic connector used for a fish tanks. Insert the Straight plastic connector in to the recently created hole a the bottom of the white plastic bottle. Just put some quick fixing hard adhesive to the plastic connector and then connect it. So that there is no leak.
Let it dry for a few minutes. Check for any leakage and then proceed to next step. Now just connect a white plastic fish tank aquarium tube to the outside of the straight plastic connector.
Connect the Plastic bottle to the Hard black plastic Waste Ink Opening in Epson L 110 Printer and then let the tubing come down and put the tube in to a bigger plastic container externally.
First i use a buffer tank, the buffer tank is attached to the printer, there is a hosing tube from the buffer tank to the bigger external tank.
The ink could be drained periodically from bigger external tank. Whereas the buffer tank is always attached to the L 110 printer.
There is no need to re attach the Waste Ink Pad Chamber, by using this method.
0 comments:
Post a Comment